King Kutter King kutter Lawn Mower 999994 User Manual download pdf (Page 24)

4 FT. FINISHING MOWER ONLY

TO REPLACE BELT:

STEP 1 Remove top cover.

STEP 2 Loosen nut on adjustment pulley to allow for movement. (See

Fig. ―D‖)

STEP 3 Loosen nut on right side of L Bracket. (See Fig. ―D‖)

STEP 4 Loosen belt by moving adjustment pulley in opposite direction

you would to tighten belt.

STEP 5 Remove bolts (2) from hinge bolt gearbox plate from finishing

mower deck. (See Fig. E).

STEP 6 Loosen nuts (2) from hinge bolt gearbox plate.

STEP 7 Raise gearbox assembly and pull out belt.

STEP 8 See (Fig. D) for belt placement on pulleys.

STEP 9 Do step 4 & 5 under section: ―TO ADJUST BELT‖ to tighten.

TO ADJUST BELT:

STEP 1 Remove top cover.

STEP 2 Loosen nut on adjustment pulley to allow for movement. (See

Fig. ―D‖)

STEP 3 Loosen nut on right side of L Bracket. (See Fig. ―D‖)

STEP 4 Turn nut on left side of L Bracket in counter clockwise direction

until belt is tight.

STEP 5 Retighten nut on right side of L Bracket and nut on adjustment

pulley.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

No comments

King Kutter King kutter Lawn Mower 999994 User Manual Page 24